Control your vacuum system with only one device

With the OmniControl, you only need one control device

for your complete vacuum system. The device combines

control of the total pressure with control of the pumps.

Data exchange and processing between Pfeiffer Vacuum

products is thus very uncomplicated and without the need

to purchase additional devices. The OmniControl controls

products that support a Pfeiffer Vacuum RS-485 protocol

(e.g. HiPace, HiScroll, HiLobe, MVP und DigiLine). In addition,

ActiveLine gauges (with analog output) can be connected as

an option.

Large touch display for convenient operation

Thanks to the 3.5“ touch display, you can control your

vacuum system conveniently and easily. For example,

total pressure and the pump parameters (speed, power

consumption, etc.) are available at a glance. A button for

switching the devices on and off can also be added.

Available as rack or mobile device for manual operation

The OmniControl basic unit is available with or without

internal power supply. Units without a power supply are

available as a rack or mobile unit for manual operation.

This allows the OmniControl to be used either locally or at

constantly changing locations. The rack units are also

available with an optional table mount.

Advanced features with Gauge/IO and Data option

With the Gauge/IO or the Data option you can extend

the OmniControl according to your needs:

Option Gauge/IO

    The Gauge/IO option provides two connections:

    An ActiveLine transmitter can be connected to the

    Gauge socket. This makes a separate gauge controller

    obsolete. The IO connector (2 x relay, 2 x DI, 2 x DO, 1 x AI,

    1 x AO) offers the possibility to integrate external

    components. For example, you can switch a valve

    depending on the pressure.

Option Data

    With the data option, you can conveniently save measured

    values as a CSV file on a USB stick or a MicroSD card.

    This allows the data to be analyzed or archived later. The

    data objects to be saved can be freely defined (e.g. total

    pressures, speed, error codes).